Published on:

EU and UK Export-Control Updates for 2026: What Exporters Need to Know

Both the EU and UK are updating their export-control lists, with changes affecting advanced computing, semiconductor manufacturing, specialist materials and other sectors. The EU has adopted a revised dual-use list, subject to the remaining scrutiny and publication process. The UK has made regulations taking effect on 1 December 2026, updating its dual-use and military lists and withdrawing GEA001 in Great Britain, subject to transitional arrangements. These changes will affect exporters’ classifications and exporters may need licences for products they previously exported without authorisation, while other items which were previously controlled may no longer require licensing.

Key takeaways

  • EU and UK updates are under way. The UK changes take effect on 1 December 2026. The EU update remains subject to the remaining scrutiny and publication process, and its entry-into-force date has not been confirmed. Businesses should assess the requirements separately and prepare for different implementation dates.
  • AI-chip controls are expanding, with consequences for finished hardware. Both the EU and UK add a lower-TPP route under 3A501.a.16, potentially bringing established accelerator products into scope. Through 4A507, the effect also reaches servers, accelerator cards and other hardware containing qualifying chips. Existing product ranges and cross-border hardware supply chains therefore need review, not just next-generation chips.
  • Other advanced technologies are also affected. The EU’s expanded controls cover semiconductor manufacturing equipment and specialist materials, with further changes affecting life sciences, chemicals and other sectors. Some controls will also ease, and related software and technology may be affected. The UK regulations introduce substantially overlapping changes, although differences remain in the scope of particular controls, exclusions and related software and technology provisions.
  • UK military-list and licensing changes also require preparation. Targeted military-list amendments affect specified equipment and components. GEA001 will be withdrawn in Great Britain with a transitional period ending on 1 April 2027 for exporters registered immediately before commencement. The ECJU also plans to revoke the EU Member States OGEL, with users permitted to continue using it until 1 April 2027. Businesses should assess alternative authorisations, including the Dual-Use OGEL. EU GEA001 will continue under the applicable framework in Northern Ireland.
  • Businesses should prepare to reassess classifications and licences. Exporters should gather technical evidence, identify necessary reclassifications, check coverage of existing authorisations and review pending shipments and technology transfers. A relaxation of list controls does not automatically remove licensing requirements under other controls or sanctions.

EU developments

On 14 September 2026, the Commission adopted a delegated regulation replacing Annex I to Regulation (EU) 2021/821. The changes are not yet in force as the European Parliament and Council have two months from notification to object, extendable by a further two months; both can also clear the act early. The regulation will enter into force the day after publication in the Official Journal. No publication or entry-into-force date has been confirmed. Until then, exporters should use the Annex I currently in force while preparing for the changes.

The update reflects decisions taken through international export control regimes, including Wassenaar, the Australia Group and the Nuclear Suppliers Group, as well as additional commitments accepted by Member States as Wassenaar participants. Difficulties securing agreement in the multilateral regimes, including obstruction by Russia, have prompted Member States to introduce national controls on emerging technologies. Those measures risk a patchwork of requirements across the single market, with different treatment depending on where an export occurs. The Commission’s 2024 White Paper identified that fragmentation risk and proposed routes to more uniform controls. The 2025 Annex I expansion incorporated additional commitments accepted by Member States as Wassenaar participants to establish uniform EU controls. This 2026 update continues that approach and helps close gaps between national lists and gives exporters a common EU classification baseline, although national controls and licensing requirements still need separate consideration. Key changes include:

Advanced computing and related software

The update expands controls on advanced computing chips under 3A501.a.16. Alongside the existing threshold of total processing performance (TPP) of at least 6,000, it introduces an additional threshold for chips with both: (i) TPP of at least 1,600 but less than 6,000; and (ii) performance density of at least 5.92. Chips not designed for use in data centres are excluded from the additional, lower-TPP threshold, though that exclusion does not apply to the existing 6,000-TPP threshold. This is a material extension: established data-centre accelerators can fall below the existing performance threshold but meet the new performance-density test. Exporters should check the prescribed calculations, rather than a product’s age, branding or description as an “AI chip”.

NVIDIA’s A100 illustrates why established accelerators warrant reassessment. Based on published figures, and some working assumptions, its dense FP16 Tensor Core performance yields an illustrative TPP figure of 4,992. Dividing that figure by NVIDIA’s stated 826 mm² GPU die area gives an illustrative performance density of approximately 6.04. This does not establish the complete regulatory calculation, and exporters should confirm the exact variant’s regulatory TPP and performance density before concluding whether it is newly controlled under 3A501.a.16.

The data-centre condition is significant because it focuses the new route on chips designed for concentrated computing capacity. The distinction limits the reach of this lower-TPP route into chips not designed for data-centre use, while leaving the existing 6,000-TPP route unaffected. The expansion also sits within the EU’s broader economic-security agenda, alongside investment in AI factories, gigafactories and data-centre capacity. Controlling outward transfers of sensitive technology and strengthening European computing infrastructure represent complementary strands of the EU’s efforts to build technological capability and reduce strategic dependencies.

The effect extends beyond the chip itself. 4A507 covers computers, electronic assemblies and components containing an integrated circuit specified in 3A501.a.16. Consequently, a chip newly captured by that entry can also bring the servers, accelerator cards and other assemblies containing it within 4A507. Therefore, even though the 4A507 control itself is largely unchanged (beyond one edit clarifying that analogue computers are included), exporters should reassess finished products, as well as the chips themselves. The commercial significance is the reach into existing server infrastructure and supply chains. Businesses should review exports of established systems, including used equipment and hardware being relocated between data centres, rather than focus solely on new chip purchases.

The EU amendment moves closer to the US approach but does not reproduce it. Both regimes use processing performance and performance density to identify controlled chips, and the EU’s new route mirrors the parameters in one of the US tests. However, the US controls also capture chips at lower overall performance levels and through additional tests for lower-density chips. There is a further difference in the data-centre exclusion. The EU’s lower-TPP route refers to design for data-centre use, while the US exclusion refers to design or marketing and applies only below TPP 4,800. The EU entry therefore remains narrower in technical coverage. An EAR classification cannot simply be carried across to the EU: jurisdiction, other entries, destinations, end uses and available authorisations must also be assessed separately.

Separately, 4D001.a expressly brings in software specially designed or modified for developing or producing equipment specified in 4A005.

Semiconductor manufacturing

The replacement Annex expands controls across the semiconductor production chain. Additions to 3B501 cover specified molybdenum and ruthenium deposition equipment, extreme ultraviolet photoresist processing and mask-inspection equipment, particular single-wafer cleaning equipment, and other related manufacturing tools. Amendments to 3B001.g and .i extend mask, reticle and imprint-template controls to items designed for chips specified in 3A501.a.15 or .16, and related software controls are also expanded.

The treatment of process design kits (PDKs) changes too. A common note for 3E001 and 3E505 excludes PDKs unless they contain libraries implementing functions or technologies for items specified in 3A001 or 3A501. The previous 3E001 exclusion referred only to 3A001. A PDK containing a relevant 3A501 library may therefore lose the exclusion under 3E001, although it must still meet the applicable technology-control criteria to be controlled.

Taken together, these changes target more of the capability needed to manufacture advanced chips, alongside the chips themselves. Their reach into deposition, cleaning, inspection and design libraries means the review extends beyond the headline lithography equipment. Suppliers supporting individual stages of a fabrication process may be affected even where they do not supply finished chips.

Life sciences and chemicals

The amendment to 2B352.i broadens the control on partly or fully automated nucleic-acid synthesisers, or synthesisers and assemblers, by lowering the length threshold for continuous nucleic acids from greater than 1.5 kilobases to greater than 0.5 kilobases and removing the previous error-rate qualifications. As the control focuses on the  equipment’s capabilities and the entry does not depend on whether the intended output is a controlled pathogen or toxin, equipment used in routine civilian research can therefore fall within scope.

Other changes add the chemical precursor 1,1,3,3-tetraethylguanidine to 1C350 and clarify chemical-contact surface requirements for manufacturing equipment under 2B350.

Other affected sectors

Selected additions include:

  • Precision sensing and power electronics: specified inductive rotary encoders (3A501.f) and high-voltage power semiconductor switches, diodes and modules (3A501.h). The latter includes exclusions for devices incorporated into equipment designed for specified civil applications.
  • Turboexpanders: for turboexpanders and turboexpander-compressor sets under 1B232, helium is added alongside hydrogen, while the outlet-temperature range changes from 35 K or less to 15–35 K. The amendment therefore broadens one aspect of the control while narrowing another.
  • Advanced materials: ceramic composites with a glass or oxide matrix reinforced with qualifying continuous alumina or mullite fibres, or combinations of them (1C507). The new 1C507 entry is also reflected in controls on composite-repair technology (1E002.f), specified launch-vehicle and spacecraft components (9A010), and technology for certain engine components (9E003). The implications therefore extend beyond materials producers to component manufacturers and businesses sharing repair know-how.
  • Manufacturing equipment: specified laser-driven chemical vapour deposition equipment producing multiple parallel silicon-carbide fibres (1B501.d.2), and additive manufacturing equipment producing certain energetic-material devices or shapes using ultrasonic extruders or nozzles (1B504). Software specially designed or modified for developing, producing or using the newly specified equipment is also covered by 1D001.
  • Technology: development technology for specified gas-turbine axial compressors (9E503.l), and libraries enabling specified radio equipment for countering improvised explosive devices (5E501.f).

Some controls are easing

The changes also ease certain controls. Higher thresholds, revised exclusions and deleted control routes may mean that particular products no longer require a licence. Examples include:

  • The energy-density threshold for specified secondary cells rises from more than 350 Wh/kg to more than 500 Wh/kg at 20°C (3A001.e.1.b).
  • New or clarified exclusions concern certain chemical detection systems (1A004.c), reverse-osmosis and medical blood-filtration equipment (2B352.d), and thermal-sensing optical fibre Bragg gratings (6A002.d.3).
  • Laser controls under 6A005 raise some thresholds. For certain non-tunable, continuous-wave lasers with wavelengths above 975 nm and up to 1,150 nm, the power-only threshold rises from above 1 kW to above 2 kW for single-mode lasers, and from above 2 kW to above 3 kW for multimode lasers. Single-mode lasers can remain controlled above 500 W where spectral bandwidth is below 40 GHz, or above 1.5 kW where bandwidth is at least 40 GHz but below 100 GHz. The update also revises industrial exclusions, removes a multimode control route based on wall-plug efficiency and adds an exclusion for certain tunable lasers.
  • For quantum-computing technology, 4E001.a no longer includes 4A506 equipment in its coverage, although 4E001.b.3 continues to control technology for developing or producing items specified in 4A506.b and .c.
  • The update deletes certain control routes for analogue-to-digital converters and related equipment (3A001.a.5.a.1, 3A001.a.14.a.1 and 3A002.h.1.a), as well as controls on specified underwater vision and lighting systems (8A002.d and .g).

A deleted control or higher threshold does not automatically remove a licensing requirement. Exporters should check remaining entries, applicable national controls, end-use controls and sanctions before changing their licensing position.

UK developments

The Export Control (Amendment) Regulations 2026 were made on 29 October and laid before Parliament on 3 November 2026. They take effect on 1 December 2026, updating the military list and the assimilated dual-use list. The military-list amendments apply throughout the UK, while the amendments to the assimilated Dual-Use Regulation apply in Great Britain. Northern Ireland remains subject to the applicable EU dual-use framework.

There is substantial overlap with the EU update. The UK adopts the same additional advanced-computing threshold under 3A501.a.16: TPP of at least 1,600 but below 6,000, combined with performance density of at least 5.92, with an exclusion for items not designed for data-centre use. The chip-classification and containing-hardware considerations discussed above are therefore also relevant to exporters from Great Britain. Other changes include controls on specified semiconductor manufacturing and inspection equipment, ceramic composites, inductive encoders and power semiconductors, alongside changes affecting nucleic-acid equipment, chemicals, lasers and other sectors. Nonetheless, exporters should still check the precise wording of the applicable UK entries and any accompanying guidance before relying on a revised classification or exclusion.

The amendments also do not reproduce the EU update in full. For example, they do not implement the EU’s common PDK note and associated narrowing of the 3E001 exclusion, the express software extensions under 1D001 and 3D001, the expanded mask and imprint-template references under 3B001.g and .i, or the turboexpander changes under 1B232. Conversely, the UK adds references to 1C507 materials in controls on specified precursor materials and coating-system technology, which the EU does not. Some provisions also warrant particular care. For multimode lasers, the UK revises the industrial exclusions but does not amend the principal power-only threshold in 6A005.a.6.b.2 from above 2 kW to above 3 kW, as the EU update does. Consequently, some products may remain controlled in Great Britain despite benefiting from the EU changes. Exporters should assess the resulting UK entries separately before changing their licensing position.

The military-list amendments are targeted, including revised parachute and pyrotechnic-projector entries and new notes identifying equipment covered when specially designed for directed-energy weapon systems. Although many amendments clarify existing controls or correct terminology, suppliers of relevant components and specialist equipment should reassess their classifications.

The regulations also move Haiti from the list of countries subject to military-goods transit controls to the list of countries which are embargoed as well as being subject to military-goods transit controls. As Haiti is already subject to an arms embargo and military end-use controls, the practical impact of its move may be limited for transactions already covered by those restrictions. Businesses should nevertheless check how the amendments affect their licensing or other compliance obligations. The Central African Republic meanwhile will move from the embargoed list to the military-goods transit list. However, this move would not, by itself, remove restrictions under separate sanctions legislation and exporters should continue to check the applicable sanctions regime.

Finally, the regulations withdraw General Export Authorisation 001 (GEA001) in Great Britain from 1 December 2026, although exporters registered to use it immediately before that date benefit from a transitional period ending on 1 April 2027. Earlier this year, the UK published an open general export licence which largely consolidates GEA001 (the “Dual-Use OGEL”) (see our previous blog post here). On 11 November, the UK announced that it will revoke the EU Member States OGEL as it has also been superseded by the Dual-Use OGEL, but that users may continue using the EU Member States OGEL until 1 April 2027. Accordingly, exporters may wish to prepare to move eligible exports under GEA001 and the EU Member States OGEL to the Dual-Use OGEL ahead of April 2027. This would include registering for the Dual-Use OGEL, updating shipping instructions, broker guidance, export documentation and internal systems, and ensuring appropriate recordkeeping and reporting. The GEA001 withdrawal does not apply in Northern Ireland, where EU GEA001 will continue under the EU dual-use framework.

Key takeaways for exporters

The period before commencement gives businesses time to turn the changes into practical classification and licensing decisions. However, with the EU changes set to apply the day after publication, businesses that gather the technical evidence and review affected transactions now will be best placed to adapt to the changes:

  1. Review classifications by export location. Include goods, components, manufacturing equipment, software and technology currently classified as uncontrolled in the review, as well as electronic transfers and overseas access to controlled software and technology. Distinguish the EU, Great Britain and Northern Ireland, which uses the EU dual-use framework.
  2. Gather technical information. Obtain relevant specifications and supporting calculations from engineering teams or suppliers. Where a component falls within the revised controls, check whether equipment containing it (such as a server or accelerator card) is also controlled.
  3. Check licences and pending transactions. Review open orders, scheduled shipments and planned technology transfers that may take place after commencement. Check whether existing licences cover revised classifications or require amendment or replacement. GEA001 and EU Member States OGEL users in Great Britain should assess the impact of the withdrawal, and the scope and conditions of alternative licences, including the Dual-Use OGEL.
  4. Update records and procedures. Record the list version and technical evidence supporting each decision, and make sure relevant teams can identify when a product or specification change requires reassessment.
  5. Plan for separate start dates. Prepare for the UK changes on 1 December 2026 and monitor EU Official Journal publication for the EU start date. Apply the controls and licence conditions in force for the relevant export, alongside applicable national controls, end-use controls and sanctions.